|
Mixers |
10/7 CFT & 7/5 CFT Mixer
|
10/7 CFT & 7/5 CFT Mixer |
|
Salient Features : |
|
The Drum |
The new features include a large diameter drum, blending action between drum and broad central cone with specially shaped mixing blades to ensure a thorough unsegregated mix, wet or day, in theleast possible time, with clean & rapid discharge. The Drum has a guaranteed 10 per cent over load capacity. The Drum top is made from heavy gauge bleck plain sheet which has a beaded rim to increase strength. |
|
Loading Hopper |
Built of heavy gauge steel sheet fabricated to give the powerful conical form. |
|
Chasis |
Robustly constructed of heavy steel section to withstand continuous hard and rough use and mounted on 4 C.I. wheels and having a draw bar with swivelling arrangement. |
|
Transmission |
By steel bushed and roller chains throughout. |
|
Water Tank |
8 gallons capacity, revolving type and is supplied as optional. |
|
Housing & Guards |
|
|
10/7 CFT Mixer |
|
|
7/5 CFT Mixer |
|
|
The Prime mover and all the moving and wearing parts are fully covered in a heavy gauge steel sheet housing to gaurd the entry of water and abrasives. The housing has locking arrangement. A separate tool box has also been provided for keeping the service-tools. |
|
|
|
Reversible Mixer
|
Reversible Mixer |
|
Heavy duty channel chassis provides durability and stronger support in the areas |
|
The sliding hopper is a popular model, but hydraulic tipping hopper and steel wire hoisting hopper is also an option |
|
Four jack legs give maximum stability throughout the mixing cycle |
|
Tow able chassis with two pneumatic wheels provides complete mobility, available in all the three options |
|
Power Source: 3-phase electric motor |
|
|
The drum rotates in one direction for mixing and in the opposite direction for discharging the concrete. There are two types of blades attached to the inner walls of the drum. One set drags the concrete upwards and towards the center of the mixer when the drum rotates in one direction; the second set of blades pushes the concrete towards the opening when the drum rotates in the other direction. The blades have a spiral arrangement to obtain this desired efect for discharging and mixing. |
|
Specification : |
Model |
AECC 350-8EH |
AECC 350-6E |
AECC 350-11E |
Total Power (KW) |
7.5 |
5.5 |
11 |
Power Source |
Eletric motor, 3-phase, 380V, 50Hz |
Unmixed Capacity (L) |
560 |
Mixed Capacity (L) |
350 |
Capacity |
10-14 m3 per hour |
Dimensions (mm) |
Length |
3100 |
2765 |
2980 |
Width |
2140 |
2140 |
2140 |
Height |
3070 |
3000 |
3000 |
Weight |
1510 |
1420 |
1530 |
Hopper Lifting Model |
Hydraulic |
Steel Rope Hoisting |
Tipping Hopper |
Sliding Hopper |
|
|
|
|
AECC 350-8EH |
|
|
AECC 350-6E |
|
|
AECC 350-11E |
|
|
|
|
|
|
|
|
|